EN
બધા શ્રેણીઓ
EN

પોઇન્ટ Careફ કેર ટેસ્ટિંગ

પબા 1000

Best choice for the early screening of renal disease


ઝાંખી
  • હેતુપૂર્વક ઉપયોગ

    The PABA-1000 ACR Analyzer is intended to be used with the mALB/Cr Reagent Kit manufactured by Changsha Sinocare Inc. to quantitatively determine microalbuminuria, creatinine and ACR (the ratio of microalbuminuria and creatinine) in urine sample. It is for in vitro diagnostic use only. It is intended for prescription point-of-care use as an aid in the diagnosis of renal disease.

  • વર્કિંગ પ્રિન્સીપલ

    The ACR of tested sample is determined by colorimetry (Cr) and fluorometry (mALB). When passing through tested solution, one light beam is absorbed by Solution A, while another light beam excites the fluorescent substances in Solution B. The content of tested substance, which is clinically significant, can be acquired by analyzing the amount of absorbed light or generated florescence.

  • પેકિંગ યાદી

    ACR Monitoring System consists of PABA-1000 ACR analyzer, mALB/Cr Reagent Kit and control solutions (level 1, level 2). The mALB/Cr Reagent Kit is intended to be used with the PABA-1000 ACR Analyzer to quantitatively determine microalbuminuria, creatinine and ACR (the ratio of microalbuminuria and creatinine) in urine sample.



Diabetes is the leading cause for the end-stage renal disease


▼In developed countries, about 1/3 of diabetic patients have diabetic kidney disease, which is the main cause of renal failure 1,2

▼According to the DEMAND study, the detection rate of albuminuria in Asian diabetic patients was 56%, higher than that in Caucasian patients (41%) , Early detection of renal dysfunction may arrest/delay the progression of renal failure





5


6


4

સ્પષ્ટીકરણ
વસ્તુપરિમાણ
નમૂના પ્રકારપેશાબ
રીએજન્ટ

mALB(MAU)/Creatinine test kit

(fluorescence and Benedict-Behre Methods)

ભાષા
English / simplified Chinese
ડિસ્પ્લે5-inch touch screen
કમ્યુનિકેશન બંદરRS232,USB,RJ45
પાવર ઇનપુટ~220V,50Hz,1.4A
પરિમાણો380mm×240mm×254mm(L×W×H)
નેટ વજન
6.5kg
પ્રિન્ટર
Built-in thermal printer
Single test timeAbout 6 min
Data storage volume2000 test and quality control data
વસ્તુ

પદ્ધતિ

રેંજશુદ્ધતા

mALB (MAU)

Fluorescence scattering5.0mg/L-200.0mg/L

5.0~30.0mg/L

SD2.0mg/L;

30.1~200.0mg/L,CV6.5%
ક્રિએટીનાઇનBenedict-Behre

10.0-400.0mg / dL

(0.88-35.30mmol/L)

10.0-60.0mg/dL SD3.0mg/dL;

60.1-400.0mg/dL CV5%
એસીઆર/

1.3-2000.0mg/g

(0.14-227.28mg/mmol)
CV10%

Sinocare #ACR Analyzer video introduction in English