All Māhele

Hoʻoikaika i ka Pūnaehana Puʻuwai koko

ʻĀpana AQ Aila

LUNULA nanoTM patent blood sample applying technology; 99.99% pure gold electrode test strip;Widely HCT test range;Strong anti-interference

  • Hoʻohana hoʻohana

    The Gold AQ Plus Blood Glucose Monitoring system is intended for use in the quantitative measurement of glucose in human whole blood taken from the fingertip (capillary) or from the vein (venous) or from the artery (arterial). It is intended to be used by people with diabetes at home or clinical site as an aid in monitoring the effectiveness of their diabetes control programs.

  • Kūleka Kūʻai

    A glucose test is based on the measurement of electrical current caused by the reaction of glucose with the FAD glucose dehydrogenase on the electrode of the strip. The blood or control solution sample is drawn into the tip of the test strip through capillary action. Glucose in the sample reacts with the FAD glucose dehydrogenase and generates electrons, which produce an electrical current. The Gold AQ Plus blood glucose meter measures the electrical current and calculates the glucose result. The glucose result is displayed by the meter in the unit of mg/dL or mmol/L.

  • About the Gold AQ Plus Blood Glucose Test Strip

    The Gold AQ Plus blood glucose test strip is intended to be used with the Gold AQ Plus blood glucose meter to measure the amount of blood glucose in fresh capillary whole blood or venous blood or arterial blood. The Gold AQ Plus blood glucose test strip used with the Gold AQ Plus blood glucose meter provides a complete test system that is intended for in vitro diagnostic use by people with diabetes. The Gold AQ Plus blood glucose test strip do not require coding. Please refer to the “Performing a Blood Glucose Test” section for complete instructions.

The Gold AQ Plus blood glucose test strip consists of the following parts:

Nā nui koko0.8μL
ʻApana ʻanoKe kō koko piha koko nui
Ka hoʻopiliʻanaPalapala hoʻohālike
Waena ʻia5s
Ke waiho ʻana i ke ʻano no ka mālama ʻana / me ke ala-20C ~ 55 ℃
Ana(103mm (L) x 60mm (W) x 24mm(H))
Weightno 59g
Power kumu2 AAA alkaline batteries
hoomanao anaʻO 999 nā hopena kōkelika o ke koko me
lā a me ka manawa
ʻO 200 nā hopena hoʻonā ea pālua me
lā a me ka manawa
Test condition Temperature:10 ℃ ~ 40 ℃
Relative Humidity: 10% ~ 90% RH (non-condensing)
Altitude: Up to 10100 feet (3078 meters)
Note: Use within specified environmental conditions only.
Ke ʻano hana10 ℃ ~ 35C≤80% RH
ieoaeunoaiPolika paʻa lima
Nā kikowaena kikowaenamg / dL or mmol / L
Ka pae ana20 ~ 600 mg / dL or 1.1 ~ 33.3mmol / L
Kūleʻa i ka hana ʻōnaehana hoʻoneʻeFAD glucose dehydrogenase, potassium ferricyanide,
non-reactive ingredients
Control solution chemical compositionWater, glucose, preservative, dyes, phosphate buffer,
viscosity enhancing agents
Hōʻike hōʻike i ke kūlana kālai1℃~30℃ 10%~90%RH
Ola ola10 mau makahiki (kuhi ʻia ma ka hōʻike ʻo 7 mau manawa i kēlā me kēia lā).
I ka wā hoʻohana, pono ka mea hoʻohana e mālama i ka huahana
e pili i nā pono o ka hoʻohanaʻana i kēia mea hoʻohana.

1) 99.99% gold electrode, a conductivity of 1,400 times than carbon electrode.
2) With superior electrochemical property and extremely strong corrosion resistance.
3) Able to detect the blood sample temperature, HCT and ambient temperature accurately, and automatically correct the result deviations caused by above factors.

LUNULA nano patent blood sample apply technology: Upon optimization of the quantity and positions of
air exhausting microporous, the blood applying speed has been obviously improved.