If you have diabetes, monitoring your blood sugar can help you keep it in the range you want it to be in. This can make it less likely that something bad will happen to you, like going blind or hurting your kidneys.
Glucose monitors or Sinocare blood sugar machine come with testing strips, small needles or lancets, and something to hold the needle. Some also come with a logbook or let you save the results on your computer.
A blood glucose meter or Sinocare diabetes check machine is a small, portable tool that can help you keep track of how much sugar is in your blood. It gives you a reading by reacting chemicals on a test strip with the amount of glucose in your blood. The results are shown on a digital screen, and most people can read them in less than a minute.
Your meter may have extra features, like a clock or a memory chip that stores your readings and lets you see patterns. These features make it easier for you to look at your results and talk to your doctor about them.
How you use your meter affects how accurate the results are. Check the instructions for your meter to see what steps and methods you need to take to get the best readings.
Most people use finger pricks to check their blood sugar levels. On some meters, you can also use a lancing tool or prick your thigh. These methods are safer and less painful than sticking your finger, but it's important to follow the glucose monitor's instructions.
Before you stick your finger in a needle, wash it with soap and water and dry it well. You should also get rid of any food that could change the results.
After you have cleaned your finger, put a drop of blood on the test strip. In a few seconds, the meter will read your blood sugar level and show you the result on a digital screen.
Blood glucose levels change based on what you eat, drink, and how much you exercise. Keep track of your glucose levels so that you and your doctor can make a treatment plan based on how high or low they are.
Monitoring your blood glucose is a great way to take care of your diabetes. Regular testing helps you and your doctor figure out when to take your medicine and when to change your diet or activities to avoid having too little or too much glucose in your blood.
There are many different kinds of blood glucose meters, so you can choose one that fits your budget and your needs. Some are easier to carry because they are smaller and lighter. Some meters come with a logbook that can be downloaded to your computer so you can keep track of your readings. You can also tell your doctor what you found. Some meters can also store dates, times, and the amount of food eaten.
.jpg)
A Sinocare blood glucose kit has test strips that measure how much sugar is in the blood. They are used with a glucose meter to find out if your blood sugar level is in the right range for your type of diabetes.
The meter sends an electric current to the electric terminals on the test strip. The meter compares the number on your test strip to the amount of sugar in your blood to figure out how low your glucose level is.
When you use your test strip and meter together, there are a few things to keep in mind, like how long you need to wait between tests. Wait a few hours before using a new strip. You shouldn't use more than one strip at a time to keep the strips from getting damaged.
Using testing strips that are old or have been tampered with can give you wrong results, which can make it hard to manage your diabetes properly. Also, the wrong results might make you change your medications or dosages, which can make your condition even worse.
You can avoid these problems if you buy test strips that have been approved by the FDA. You can find these items at a lot of pharmacies and drug stores.
A glucose meter can be used with these strips. They are made of something different. At one end, they have a complicated circuit that turns glucose into an electric current through a chemical reaction. The concentration of glucose is then shown on the screen.
Care must be taken to cut the circuit so that mistakes don't happen that could lead to wrong results. There are a few things that can change how accurate the circuit is:
Changes in temperature and humidity can mess up the way enzymes work. The people who make glucose strips have tried to fix this problem by adding chemicals that keep the enzymes from breaking down.
Small mistakes in the circuits and different thicknesses could also affect how accurate test strips are. By changing the electrical current that the meter sends to the test strips, these mistakes can lead to a wrong reading.
Keeping track of your diabetes is important, and a Sinocare blood glucose kit is a key part of that. It lets you keep an eye on your blood sugar levels and change your diet or medicines as needed.
A lancing device, also called a blood pricking device or finger pricker, is the tool you use to get a blood sample for your glucometer. These tools have a small spring-loaded mechanism that pushes out a lancet, or needle, to prick your skin and get a drop of blood for testing.
The type of lancing device you choose will depend on your needs and level of comfort. A lancing device that looks like a syringe is easier to use than a pen because you don't have to use your fingers.
There are also lancing tools that are made for certain types of skin or that make the process painless. These devices use vacuum technology to pull blood to the surface of your skin so you don't have to prick your skin more than once.
In another type of lancing tool, the depth of the needle jab is controlled by a special setting. If you have very thin skin or often hurt your fingers, you may want to set the depth penetration to a lower number so that your finger doesn't graze your skin and lose its sample.
Before you use a lancing device, you should read the directions to make sure you know how to set it up right. Most of the time, you can set it to any number between 0 and 10. (exact depth options vary by product).
Once you've chosen the right lancing device and lancets for your needs, it's time to start getting blood samples. Take the safety cover off your lancet and put it in the endcap of your lancing device (see Figure 1)
When you're ready to start testing, twist the white band on the lancing device to open the endcap. Slide the lancet ejector back into place and replace the device's end cap.
Using a Sinocare blood glucose kit is a key part of keeping your diabetes under control. It will help you keep an eye on your blood sugar and find hypoglycemia (low or high blood sugar).
To calibrate, read, and take a sample with the glucometer, you must follow the steps in the manual. These will be different for each device, but the basic steps are always the same.
The most important thing to remember is that how your finger is cleaned before a test can change how accurate it is. You shouldn't use a smear or blood test because they can change the results.
For the best results, you should also clean and disinfect your glucometer on a regular basis. This will keep you from getting sick and make sure that your readings are as accurate as possible.
Wiping your glucometer with a cloth that has been soaked in rubbing alcohol is one of the best ways to clean it. This will get rid of the bacteria and oil that are often found on fingerstick devices and keep them from becoming a source by accident.
You can also clean and sterilize your glucometer by letting it soak in water and then wiping it down with a sponge. Every time you check your blood sugar, you should do this.
You can also take a few minutes to read your glucose meter's user manual. It will tell you some useful things about the meter. You will also find instructions on how to read your glucose meter and figure out what it means. It should also tell you how to get your meter's results onto a computer so you can keep track of them over time.
Sinocare, Asia's No. 1 BGM manufacturing plant company is also the biggest. it is No.1 on the Chinese market, and No.5 globally. Sinocare is a BGM company with over 20 years of experience. Since its beginning in 2002, Sinocare has been listed as the first Chinese manufacturer of blood glucose meters and glucose check machine.
We are able to manufacture 8 million glucose meters annually, and 6 billion glucose test strips. We provide products like diabetes meter that cover blood glucose, uric acid levels, and other diabetes indicators.
The company is able to make maximum benefit of the advantages in professional development in their regions and bring innovative results integrating global wisdom. In 2016, Sinocare was the world's No.5 most profitable manufacturer of blood glucose meters and diabetes machine and among the leading companies on the POCT market.
Sinocare has more than 20 years of experience in blood glucose monitor manufacturing like diabetes monitor. It was founded in 2002. Offer high-quality products to those suffering from diabetes and other chronic diseases.
WhatsApp：+86-166 7049 6471 (GMT+8---09:00AM~05:30PM)
Email：[email protected]
Address：No.265 Guyuan Road Hi-tech Zone,Changsha,Hunan,China
Home / Media / Diabetes Care / Download / Contact Us / Blog / Sitemap
2001-2023 Sinocare AIl Rights Reserved
EN 
ES
RU
PT
TH
DE
TR
FR
