Khauta ea AQ Plus
LUNULA nanoTM patent blood sample applying technology; 99.99% pure gold electrode test strip;Widely HCT test range;Strong anti-interference

Overview
Tšebeliso e entsoeng
The Gold AQ Plus Blood Glucose Monitoring system is intended for use in the quantitative measurement of glucose in human whole blood taken from the fingertip (capillary) or from the vein (venous) or from the artery (arterial). It is intended to be used by people with diabetes at home or clinical site as an aid in monitoring the effectiveness of their diabetes control programs.
Teko ea Molao-motheo
A glucose test is based on the measurement of electrical current caused by the reaction of glucose with the FAD glucose dehydrogenase on the electrode of the strip. The blood or control solution sample is drawn into the tip of the test strip through capillary action. Glucose in the sample reacts with the FAD glucose dehydrogenase and generates electrons, which produce an electrical current. The Gold AQ Plus blood glucose meter measures the electrical current and calculates the glucose result. The glucose result is displayed by the meter in the unit of mg/dL or mmol/L.
About the Gold AQ Plus Blood Glucose Test Strip
The Gold AQ Plus blood glucose test strip is intended to be used with the Gold AQ Plus blood glucose meter to measure the amount of blood glucose in fresh capillary whole blood or venous blood or arterial blood. The Gold AQ Plus blood glucose test strip used with the Gold AQ Plus blood glucose meter provides a complete test system that is intended for in vitro diagnostic use by people with diabetes. The Gold AQ Plus blood glucose test strip do not require coding. Please refer to the “Performing a Blood Glucose Test” section for complete instructions.
The Gold AQ Plus blood glucose test strip consists of the following parts:
ga tlhaloso
Bophahamo ba mali | 0.8μL |
Mohlala oa mohlala | 'Mele oa mali kaofela |
Phaputso | Plasma e lekanang |
Nako ea ho lekanya | 5s |
Boemo ba ho boloka limmapa / boemelo | -20C ~ 55 ℃ |
teba ka | (103mm (L) x 60mm (W) x 24mm(H)) |
Weight | mabapi le 59g |
motlakaseng | 2 AAA alkaline batteries |
memori | Litekanyo tsa tsoekere ea mali tse 999 li hlahisa sephetho le letsatsi le nako 200 Taolo ea Tharollo ea Tharollo e hlahisa litholoana ka letsatsi le nako |
Test condition Temperature: | 10 ℃ ~ 40 ℃ Relative Humidity: 10% ~ 90% RH (non-condensing) Hematocrit:20%~70% Altitude: Up to 10100 feet (3078 meters) Note: Use within specified environmental conditions only. |
Boemo ba ts'ebetso | 10 ℃ ~ 35C≤80% RH |
kaho | E tšoeroe ka letsoho |
Mealo ea litekanyo | mg / dL kapa mmol / L |
Mealo ea tekanyo | 20 ~ 600 mg / dL kapa 1.1 ~ 33.3mmol / L |
Tlhahlobo ea lik'hemik'hale tsa liteko | FAD glucose dehydrogenase, potassium ferricyanide, non-reactive ingredients |
Control solution chemical composition | Water, glucose, preservative, dyes, phosphate buffer, viscosity enhancing agents |
Boemo ba polokelo ea mola | 1℃~30℃ 10%~90%RH |
Hlakola bophelo | Lilemo tse 10 (e hakantsoe ke liteko makhetlo a 7 ka letsatsi). Nakong ea ts'ebeliso, mosebelisi o lokela ho boloka sehlahisoa lebisa litlhoko tsa buka ena ea mosebelisi. |
1) 99.99% gold electrode, a conductivity of 1,400 times than carbon electrode.
2) With superior electrochemical property and extremely strong corrosion resistance.
3) Able to detect the blood sample temperature, HCT and ambient temperature accurately, and automatically correct the result deviations caused by above factors.
LUNULA nano patent blood sample apply technology: Upon optimization of the quantity and positions of
air exhausting microporous, the blood applying speed has been obviously improved.